# 3D file for casket

**URL:** <https://bristlemouth.discourse.group/t/3d-file-for-casket/543>\
**Category:** Community\
**Created:** [September 25, 2025, 6:24am UTC](https://bristlemouth.discourse.group/t/3d-file-for-casket/543 "2025-09-25T06:24:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![HendrikJvR](https://yyz1.discourse-cdn.com/flex029/user_avatar/bristlemouth.discourse.group/hendrikjvr/32/71_2.png) [@HendrikJvR](https://bristlemouth.discourse.group/u/HendrikJvR)\
**Post date:** [September 25, 2025, 6:24am UTC](https://bristlemouth.discourse.group/t/3d-file-for-casket/543/1 "2025-09-25T06:24:19Z")

</div>

Hi, does anyone have a 3D file (step) for the spotter casket?

---

<div class="post-metadata">

**Author:** ![estackpole](https://yyz1.discourse-cdn.com/flex029/user_avatar/bristlemouth.discourse.group/estackpole/32/23_2.png) [@estackpole](https://bristlemouth.discourse.group/u/estackpole)\
**Post date:** [October 16, 2025, 8:41pm UTC](https://bristlemouth.discourse.group/t/3d-file-for-casket/543/2 "2025-10-16T20:41:39Z")

</div>

Hey @HendrikJvR - sorry for the long delay before replying to this. I just pulled the basic geometry of one of the Casket halves (both sides are identical) for your reference. We don’t have these types of files on a public drive yet, but I can email you the file. I just sent you a DM.

---

<div class="post-metadata">

**Author:** ![zack\_j](https://yyz1.discourse-cdn.com/flex029/user_avatar/bristlemouth.discourse.group/zack_j/32/13_2.png) [@zack\_j](https://bristlemouth.discourse.group/u/zack_j)\
**Post date:** [November 26, 2025, 10:46pm UTC](https://bristlemouth.discourse.group/t/3d-file-for-casket/543/3 "2025-11-26T22:46:00Z")

</div>

Also there are now 3d files in the [technical documentation](https://bristlemouth.notion.site/Technical-Documentation-053f9b96f3f143d1a7e12ebb43814ae9?pvs=97#d85d3b880557446597afb30e6361686d).

---

<div class="post-metadata">

**Author:** ![hedisiqi](https://yyz1.discourse-cdn.com/flex029/user_avatar/bristlemouth.discourse.group/hedisiqi/32/752_2.png) [@hedisiqi](https://bristlemouth.discourse.group/u/hedisiqi)\
**Post date:** [October 29, 2026, 4:04pm UTC](https://bristlemouth.discourse.group/t/3d-file-for-casket/543/4 "2026-10-29T16:04:34Z")

</div>

If shareable, putting the geometry in the 3D Files topic would make it easier for others to find.

---

<div class="post-metadata">

**Author:** ![cadprobs](https://yyz1.discourse-cdn.com/flex029/user_avatar/bristlemouth.discourse.group/cadprobs/32/761_2.png) [@cadprobs](https://bristlemouth.discourse.group/u/cadprobs)\
**Post date:** [November 7, 2026, 9:26am UTC](https://bristlemouth.discourse.group/t/3d-file-for-casket/543/5 "2026-11-07T09:26:56Z")

</div>

This post was flagged by the community and is temporarily hidden.