# Arduino mega integration to Dev kit

**URL:** <https://bristlemouth.discourse.group/t/arduino-mega-integration-to-dev-kit/357>\
**Category:** Dev Kit Support\
**Created:** [May 23, 2024, 7:35pm UTC](https://bristlemouth.discourse.group/t/arduino-mega-integration-to-dev-kit/357 "2024-05-23T19:35:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![cwl20](https://avatars.discourse-cdn.com/v4/letter/c/bbe5ce/32.png) [@cwl20](https://bristlemouth.discourse.group/u/cwl20)\
**Post date:** [May 23, 2024, 7:35pm UTC](https://bristlemouth.discourse.group/t/arduino-mega-integration-to-dev-kit/357/1 "2024-05-23T19:35:34Z")

</div>

Hello,  
I’m working on making an Arduino Mega based custom CTD.  
The Arduino is programmed to send the sensor reading by serial ports to a desktop or other Arduino once a minute.  
My goal is to connect the Dev kit by UART port and receive the data from the Arduino, and if possible make a simple communication to trigger the Arduino to get a sample and send it back to the Dev kit.  
Here are my questions. I’m attending the workshop tomorrow and looking forward to discussing this!

1. Can I use the serial\_payload\_example for this purpose? I don’t have much experience in embedded programming, and I couldn’t understand the difference between payload UART and UART.
2. If I want to use 5V for power support, is there something I need to change on the code to enable the 5V output? There was no output when I was checking it with a multimeter.
3. Should I switch the Arduino using 3.3V to connect it to the Dev kit?
