Help with Pinout for Mote Connector on Bristlemouth Mezzanine

[jaszylu]

I’m working on a project incorporating the Bristlemouth Dev, and we are currently in the process of connecting the Mote to our PCB. We’re using the Bristlemouth mezzanine connector, but we’re stuck on determining the physical location of the pins.

We know the pins are labeled 1-30 on the development board schematic, and we have some information about the signals connected to each pin. However, we’re struggling to figure out where each of these pins is physically located on the connector itself. Specifically, we need to know which physical pin corresponds to pin 1 and the rest of the pins up to pin 30.

If anyone has experience with the Bristlemouth mezzanine connector or the Mote/dev kit, any help or guidance on locating the pins would be greatly appreciated! If you have a pinout diagram or can point us to resources that might help, that would be perfect.

Thanks in advance for your assistance!

[umakat]

Hi @jaszylu

I’m Uma
I can help you here!

I assume you’re referring to this mezzanine part on the schematic of Mote -

The dot on the silkscreen is where pin 1 of this part is. Pin 2 is on the other side. Here’s is a screenshot of the Mote with pin 1, pin2, pin 29, pin 30 are marked.

Hope this is the information you’re looking for! Let me know if you have more questions.