I am reaching out to see if anyone has access to the device board schematics for the PCBA-000630-AD. We’ve noticed that the only schematics available online are for the PCBA-000630-AB, but we’ve observed some discrepancies between the two versions.
If anyone has the correct schematics for the -AD version, or can provide any insights into the differences, it would be greatly appreciated.
Hi @jaszylu,
The Documentation page definitely needs an update. Thanks for pointing that out.
I can help you with this. Unfortunately, I’m unable to attach a pdf of the schematics here on the thread. Do you have an email address I can send it to while we update the documentation page?
Hey @jaszylu,
Good news! We updated our Technical Documentations page and schematics for all the dev board versions are now available (thanks @zack_j).
Thank you so much! I really appreciate your help.
HI, expanding on this can you also post the schematics for the AD mote as well? PCBA-000625-AD is what I am looking to purchase. Also, which development board does the PCBA-000625-AD mote connect in to?
Hi @calebwilson 
For sure! Mote’s and Dev Board’s Schematics are already updated on our Technical Documentations page.
The primary difference is the shape of the Mote PCBA, and the newer Mote versions no longer include Molex connectors. As a result, the Dev Board -AE+ versions were updated to remove the cutouts that were previously designed for Mote’s Molex connectors. We have yet to ship out the Dev board AE version.
In short –
PCBA-000630-AA/AB/AC/AD can be connected with Mote v1.2
PCBA-000630-AE or newer can on be connected with Mote 2.1
Hope this answers your question. Happy to clarify further if needed!
HI @umakat I see the mote v1.2 schematic is only for the PCBA-000625-AC mote. I know there are different versions of the mote as I have a PCBA-000625-AD mote. Are there any differences? I am assuming there are if it has a different part number.
These are the schematics I am looking for. All the different versions of the motes so I do not need to make assumptions. Another thing for documentation that would really help integrators like me is not only the schematic but the layout and pinout of the mezzanine connectors (where do pins 1-30 physically appear on the connector)
This would be nice for all the development boards and the motes. So, developers are quickly able to build a component model for the motes and put them on new custom PCBs.
So, in short.
Can you post schematics for all v1.2 motes Revs (A-D)?
And have some documentation for their physical pinout locations (dev boards and motes)?
The pinout configurations have not changed from the first versions of Mote and Dev Board, thankfully.
Thanks for pointing that out. I will work my team to make integration, compatibility and layout documentation with physical pinout indicators.
In lieu of these, perhaps this post is useful for now - Help with Pinout for Mote Connector on Bristlemouth Mezzanine.